To extend the life of your product, we recommend the following care practices.

Avoid washing more often than necessary.

Snowwear, down pieces, and technical backpacks do not need to be fully washed after every use. For daily care, spot cleaning and proper drying are usually enough.

Do not use fabric softener.

Fabric softener may affect the breathability, water repellency, and stretch performance of technical fabrics.

Do not use bleach, harsh stain removers, or chlorine based cleaners.

These products may damage fabrics, seam tapes, coatings, prints, and elastic fibers.

Avoid high heat, prolonged direct sunlight, and ironing over functional areas.

High heat may affect waterproof membranes, seam tapes, reflective details, prints, and stretch structures.

Before washing, close all zippers, fasten all hook and loop closures, loosen drawcords, and empty all pockets.

This helps reduce friction, snagging, and damage to trims during the wash cycle.

This applies to snow jackets, snow pants, bib pants, shell jackets, 3L technical shells, and similar outerwear products.

After Use

After a day on snow or outdoor use, hang the garment in a cool, well ventilated place and allow it to dry naturally.

Do not leave damp garments inside bags, cars, luggage, or enclosed spaces for extended periods. This may cause odor, mildew, or changes to the fabric surface.

For light dirt, snow residue, or surface marks, gently wipe the area with a damp cloth. Areas that come into contact with skin, such as collars, cuffs, and hems, should be cleaned regularly to remove oil and sweat buildup.

Washing

When a full wash is needed, use a cleaner designed for outdoor technical fabrics.

Do not use fabric softener, bleach, or strong alkaline detergent.

Wash separately or with similar technical garments. Before washing, close all zippers, fasten all hook and loop closures, loosen drawcords, and turn the garment inside out or place it in a laundry bag.

Use a gentle cycle with cool or warm water, according to the care label. If the care label allows, use a low spin setting. If detergent residue remains after washing, run an additional rinse cycle.

Drying

After washing, air dry the garment in a cool, well ventilated place.

If the care label allows, low temperature tumble drying may help reactivate the surface DWR water repellent finish.

Do not tumble dry on high heat.

Do not iron directly over seam tape, prints, reflective areas, logos, or RECCO® equipped areas.

Restoring Water Repellency

The water repellent finish on technical outerwear will gradually wear down with use, friction, and washing.

When water no longer beads on the surface and starts to soak into the outer fabric, the DWR finish may need to be restored.

After cleaning and fully drying the garment, you may use a water repellent treatment suitable for waterproof breathable fabrics. Always follow the instructions on both the garment care label and the care product.

Avoid coating products that are not designed for breathable technical fabrics, as they may reduce breathability.

This applies to down jackets, down mid layers, insulated jackets, and similar warmth focused products.

Daily Care

Down products do not need to be fully washed frequently.

For light stains, spot clean first with a damp cloth, especially around the collar, cuffs, front placket, and pocket edges.

If the product becomes damp after wear, hang it in a cool, well ventilated place until fully dry.

Do not store damp down products in a compressed state for long periods.

Washing

Always check the care label before washing.

Use a down specific cleaner or a mild detergent. Do not use fabric softener, bleach, or harsh stain removers.

A large capacity front loading washing machine is recommended. Use a gentle cycle and rinse thoroughly. An extra rinse cycle may help remove any remaining detergent.

Drying

Down products must be dried completely after washing.

If the care label allows, tumble dry on low temperature with clean dryer balls or tennis balls to help restore loft.

During the drying process, remove the product from time to time and gently shake or pat it to help redistribute the down evenly.

Make sure the down is completely dry before storage. Incomplete drying may cause odor, clumping, or reduced warmth.

Storage

For long term storage, make sure the product is fully dry.

Store down products hanging or loosely folded. Avoid long term compression to help maintain loft and warmth.

This applies to snow base layer tops, base layer bottoms, quick dry next to skin layers, and compression structure base layers.

Washing After Use

Base layers sit directly against the skin and should be washed after wear.

Sweat, body oil, and skincare residue may affect breathability, quick dry performance, and stretch recovery.

We recommend hand washing or machine washing on a gentle cycle with cool water.

Turn the garment inside out and place it in a laundry bag to reduce friction and snagging.

Washing Notes

Use a mild detergent.

Do not use fabric softener, bleach, or hot water.

Do not wash with items that have hook and loop closures, metal trims, or rough surfaces. These may cause snagging, pilling, or fabric damage.

Drying

Air drying is recommended.

Do not tumble dry on high heat or expose to prolonged direct sunlight, as this may affect elastic fibers and fit structure.

This applies to snow gloves, face covers, balaclavas, snow sport socks, neck warmers, and similar accessories.

Gloves

After use, allow gloves to dry naturally in a well ventilated place.

If the inside is damp, keep the opening exposed to help air circulate.

For light stains, spot clean with a damp cloth. If washing is needed, follow the care label and use hand washing or a gentle low temperature cycle where allowed.

Do not place gloves directly on radiators, open flames, or high heat sources. Heat may damage fabrics, leather, coatings, or insulation.

Face Covers and Balaclavas

Face covers and balaclavas sit close to the skin and breathing area, so we recommend washing them after use.

Hand wash or machine wash on a gentle low temperature cycle, then air dry naturally.

Do not use fabric softener or bleach.

Do not tumble dry on high heat.

Socks

Snow sport socks should be washed after wear.

Turn socks inside out before washing, and avoid washing them with products that have hook and loop closures or sharp trims.

Air drying helps protect elasticity and fit. If tumble drying is needed, follow the care label.

This applies to snow backpacks, outdoor backpacks, and everyday technical backpacks.

Daily Cleaning

After use, empty all pockets and shake out snow, water, dirt, sand, and small debris.

For surface stains, gently wipe with a damp cloth.

For localized stains, use a small amount of mild detergent. After cleaning, wipe away any detergent residue with clean water and allow the backpack to air dry in a cool, well ventilated place.

Washing Notes

Unless the care label clearly allows it, do not machine wash backpacks.

Machine washing may damage the back panel, buckles, webbing, coatings, seam sealing, or internal structure.

Do not bleach, dry clean, tumble dry on high heat, or expose to prolonged direct sunlight.

Do not scrub coated areas aggressively with a hard brush.

Storage

Before storage, make sure the backpack is completely dry.

Open zippers and pockets, then store the backpack in a dry, well ventilated place. Avoid long term compression or damp storage.

Some UZSQUARE products may include waterproof breathable fabrics, DWR water repellent treatment, seam sealed construction, reflective details, RECCO® reflectors, compression zones, printed details, or special paneling.

These functional details require gentle care.

Avoid aggressive rubbing, hard brushing, high heat ironing, harsh chemicals, and prolonged direct sunlight.

If the product includes removable parts, remove them before washing and care for each part according to its own care requirements.

If a product develops a light odor, allow it to dry fully in a cool, well ventilated place first.

Avoid using heavy fragrance sprays directly on the product, as residue may affect fabric performance.

For oil, makeup, beverage, or mud stains, spot clean as soon as possible.

Do not leave stains untreated for long periods, and do not use corrosive stain removers.

If a product becomes wet from rain or snow, dry it as soon as possible.

Do not leave wet garments, wet backpacks, or wet accessories inside plastic bags, luggage, or car trunks for extended periods.

Before storage, make sure every product is clean and fully dry.

Store products in a cool, dry, and well ventilated environment.

Snowwear and down products should be hung or loosely folded.

Avoid long term heavy compression, as this may affect garment shape, insulation loft, or functional structure.

Base layers, socks, and face covers should be washed and stored separately after drying.

Backpacks should be stored with zippers open to keep the interior dry and ventilated.